Overview
The MagFan is an ultra-energy efficient, 56”, variable speed, low maintenance, wall fan designed and produced in Denmark. Offering unprecedented combination of high capacity, high pressure and extreme efficiency, the MagFan is the ultimate solution in situations where energy is at a premium and high flow rates and pressures need to be achieved.
The pressure capabilities of the MagFan exceed 80Pa (0.32”) and it can achieve an output of well over 72,000 m3/hr at neutral pressure, making it the top performing fan in its segment as well as the most energy efficient. MagFan utilises countless hours of research and development to provide you with a technically advanced solution that is remarkably simple to use and will save you thousands in wasted energy costs.
MagFan
MagFan is a speed controlled fan. It is equipped with a 1,2kW motor and comes with a dedicated VFD (MagDrive). The MagDrive allows MagFan to operate at variable speed from 160 rpm to 670 rpm and produce anything from 2000 m3/h (1180 cfm) to 70.500 (41450 cfm) @ 0 Pascal.
Air Flow Ratio 0.81 (capacity @ 0.20” WC / capacity @ 0.05” WC)
Cfm/watt: 28 @ 645 rpm and 0.1” WC
MagFan Plus
MagFan Plus is a speed controlled fan. It is equipped with a 2,2kW motor and comes with a dedicated VFD (MagDrive). The MagDrive allows MagFan to operate at variable speed from 160 rpm to 750 rpm. Capacity from 2000 m3/h (1180) to 79.490 m3/h (46786 cfm) at 0 Pascal.
Air Flow Ratio 0.86 (capacity @ 0.20” WC / capacity @ 0.05” WC)
Cfm/watt 23 (measured at full speed (750 rpm) @ 0.1” WC)
MagFan ONe
MagFan one is an ON/OFF fan equipped with a 1,8 kW motor. The motor operates at 720 rpm (50 Hz). Capacity 69.500 m3/h (40900 cfm) @ 0 Pascal (0” WC) and 62.700 m3/h (36900 cfm) @ 25 Pascal (0.1” WC).
Air Flow Ratio 0,86
Cfm/watt 22,4 @ 0.1” WC
| TECHNICAL SPECIFICATIONS | |
| Housing and Cone | PP-HD, gray(RAL 7040) PVC, gray (RAL 7040 |
| Impellers Blades | Celstran Technofiber |
| Brackets, Guards: | Stainless steel / AISI 304 / A2 |
| Dimensions Assembled |
Weight: 90kg / 200lbs L x W x D (mm): See drawing Impeller diameter: 1430mm / 56.5" |
| Drive | Water proof speed drivecps (phi) / power factor at full load: 0.99In-built drive and motor protection |
| Motor | Permanet Magnet Synchronous 3-phase Output (continous duty): 1,.2kW @ 660RPM Insulation class F, 170˚C magnets In-built double klixon thermal protection |
| Power Supply | Universal, 100-265VAC, 50/60Hz |
- • Plug-and-run
- • Built to last, maintenance-free
- • Calculated service life 100,000+ hrs
- • Capacity up to 72,000 m3/h (42,377 cfm)
- • Runs on 95% of the world’s power grid
- • Runs on any voltage from 85VAC to 265VAC
- • Reduces CO2 emmissions by at least two thirds
- • Reduces energy bill by 70% compared to top ten competitors
- • Save 75% on transport costs
- • Soft start and acceleration
ADDRESS
226 Race Course Road,
Westridge, Rawalpindi,
Pakistan.
CONTACT
Phone: +92 51 5174284
+92 51 4174285
Fax: +92 51 5174286
info@tecmanint.com